ANIOR Hair Care & Installation Guide

Everything you need to know to install, maintain, and protect your ANIOR hair from the first wear to the last.

Installing Your HD Lace Wig

What You Will Need

• ANIOR Prep - Scalp & Lace Protectant
• ANIOR Performance Lace Adhesive
• ANIOR Lock - Melt & Seal Spray
• Fine-tooth comb or edge brush
• Blow dryer (optional)

Step-by-Step Installation

Step 1: Prepare Your Skin. Apply ANIOR Prep to your hairline and lace contact area. Allow to dry completely - approximately 2-3 minutes. This protects your skin and significantly improves how long your adhesive holds.

Step 2: Apply the Adhesive. Apply a thin, even layer of ANIOR Performance Lace Adhesive along your hairline. Allow it to become tacky - do not place the wig while the adhesive is still wet. Wait 2-4 minutes until it is clear and slightly sticky to the touch.

Step 3: Place Your Wig. Position the wig starting at your hairline. Press the lace down firmly with your fingers. Work from the center outward to eliminate air bubbles.

Step 4: Melt the Lace. Apply ANIOR Lock - Melt & Seal Spray along the hairline while the adhesive is still bonding. Use a blow dryer on medium heat to melt the lace into the adhesive for a seamless, undetectable finish. Press with a soft cloth while warm.

Step 5: Style as Desired. Your install is complete. Style your hairline, edges, and hair as desired.

Installing Your HD Frontal

Follow the same steps as wig installation above. Apply adhesive only where the frontal lace sits - typically the hairline and temple area. Allow full tackiness before pressing. Use ANIOR Lock spray to melt the frontal lace for an undetectable finish.

Washing Your Hair

Bundles and Wigs

• Wash every 1-2 weeks with sulfate-free shampoo
• Always wash in downward strokes - never circular or scrubbing motions
• Deep condition after every wash - leave on for 15-30 minutes
• Rinse thoroughly with cool water
• Air dry whenever possible. When using heat, use a blow dryer on medium setting
• Do not sleep on wet hair - allow to dry completely before storing

Removing Your Adhesive Before Washing

Apply ANIOR Remove - Lace Adhesive Remover along the hairline. Allow to penetrate for 2-3 minutes. Gently lift the lace from the edges working inward. Remove all adhesive residue from both the lace and your skin before washing. Wash the lace gently with mild shampoo after removal.

Caring for Your Hair by Texture

Straight Hair: Wrap in a silk scarf at night to preserve smoothness. Use a wide-tooth comb from ends to roots. Avoid excessive moisture - straight hair is most prone to reverting with humidity.

Body Wave and Natural Wave: Refresh the wave pattern between washes by misting with water and a leave-in conditioner. Scrunch gently and air dry. Avoid towel-drying with a rubbing motion.

Deep Wave and Kinky Curl: These textures thrive with moisture. Apply a leave-in conditioner after every wash. Scrunch and diffuse or air dry. Deep condition every 2-4 weeks to maintain softness and pattern definition.

Maximizing Longevity

• Sleep on a silk or satin pillowcase, or wrap hair in a silk scarf nightly
• Use heat protectant every time you use heat tools
• Store wigs on a wig stand when not wearing to preserve the shape and cap
• Avoid chlorine and salt water where possible - rinse immediately if exposed
• Do not use products containing alcohol on the hair - they dry and damage
• Deep condition monthly at minimum

How Long Will My Hair Last?

With proper care, ANIOR Everyday Collection hair performs beautifully for 1-2 years. The Signature Collection raw hair, with its unprocessed integrity, performs for 2-3 years or longer with proper maintenance.

Need Help?

Contact our team at support@shopanior.com for personalized guidance on your specific hair type, installation questions, or care advice. We are here to make sure your ANIOR experience is exactly what it should be.